Kenwood KDC-X7006 Status Setting, Graphic Display Selection, Display, Graphic display, 1Enter Status Setting mode, 2Select the graphic display

⁄

•To change the information by the Display Type, refer to the page on the following table for the methods to alternate by the Display Type.

Display Type	A	B	C	D	E
Graphic 1	11	11	—	—	—
Status 2	11	11	—	—	—
Text 3	—	12	—	—	—
Upper 4	—	—	12	12	—
Middle 5	—	—	12	12	—
Lower 6	—	—	12	12	—
Text 7	—	—	—	—	12

Display Type A/ Display Type B

Status Setting

Determine whether the On and Off statuses of various functions are to be displayed on the Display Type A/B.

1Enter Status Setting modeUsing the Control knob, select "DISP" > "STATUS".

For the operation method, refer to <Function Control mode> (page 10).

2Select the Status display Turn the Control knob.3Exit Status Setting mode Press the Control knob.

Display Type A/ Display Type B

Graphic Display Selection

Changing the graphic Display.

1Enter Graphic Display Selection mode Using the Control knob, select "DISP" > "GRAPH".

For the operation method, refer to <Function Control mode> (page 10).

2Select the graphic display

Turn the Control knob or push it towards left or right.

Select from the following displays:

Graphic display	Display
Movie 1 – 2
Spectrum Analyzere 1 – 3*
Wallpaper 1 – 6
Wallpaper scan	"SCAN"

* Function of KDC-X7006U.

3Exit Graphic Display Selection mode Press the Control knob.

⁄

•The setting of this function is available while "TYPE SELECT [A]"/ "TYPE SELECT [B]" is selected for the Display mode.

English 11