In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display

Setting

"DSI : ON"

LED flashes.

"DSI : OFF"

LED OFF.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"Display : ON"

Keeps the display on.

"Display : OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

When the display is off, pressing any key will turn on the display.

When the display is off, you cannot perform any operation except for the following:

Volume

Attenuator

Selecting the source

Turning off the power

During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"Dimmer : ON"

The display dims.

"Dimmer : OFF"

The display doesn’t dim.

In Standby mode

Built-in Amp Setting

Controlling the built-in amplifier.

Turning OFF this control enhances the preout quality.

Display

Setting

"AMP : ON"

The built-in amplifier activates.

"AMP : OFF"

The built-in amplifier deactivates.

Other than Standby mode/

When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel sound in the Dual Zone System.

Display

 

Setting

"Zone 2

: Rear"

Sub source (Auxiliary input source) is to be rear

 

 

channel.

"Zone 2

: Front"

Sub source (Auxiliary input source) is to be front

 

 

channel.

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs= 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.

Display

Setting

"Supreme : ON"

Plays sound using the Supreme function.

"Supreme : OFF"

Plays the original sound stored in the audio file.

The sound effect may be imperceptible depending on the relationship between the audio file format and setting.

This function is not available on iPod.

English 27