Menu system
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"AMP Bass : Flat" | Bass boost level is flat. |
"AMP Bass : +6" | Bass boost level is low (+6dB). |
"AMP Bass : +12" | Bass boost level is mid (+12dB). |
"AMP Bass : +18" | Bass boost level is high (+18dB). |
⁄
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass : +18" will not work correctly even if it is selected.
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display | Setting |
"AMP FREQ : Normal" | Boost with the normal central frequency. |
"AMP FREQ : Low" | Drop the normal central frequency 20%. |
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1Select AMP Control mode Turn the Control knob.Select the "AMP Control" display.
2Enter AMP Control modePress the Control knob for at least 1 second.
3Select the AMP Control item for adjustment Push the Control knob towards up or down.
⁄
•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
4Adjust the AMP Control itemPush the Control knob towards right or left.5Exit AMP Control mode Press the [FNC] button.⁄
•You cannot use the LX AMP operation during standby mode.
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to mono to reduce
Display | Setting |
"CRSC : ON" | The CRSC is ON. |
"CRSC : OFF" | The CRSC is OFF. |
⁄
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
28 English