Troubleshooting Guide
The messages shown below display your systems condition.
Eject: | • No disc magazine has been loaded in |
| the changer. The disc magazine is not |
| completely loaded. |
| • No CD in the unit. |
No Disc: | No disc has been loaded in the disc |
| magazine. |
TOC Error: | • No disc has been loaded in the disc |
| magazine. |
| • The CD is quite dirty. The CD is upside- |
| down. The CD is scratched a lot. |
Read Error: | • The number of files or folders which are |
| stored in the connected USB device is above |
| the limitation. |
| • The file system of the connected USB device |
| is broken. |
| ➪ Copy the files and folders for the USB |
| device again referring to http://www. |
| kenwood.com/usb/. If the error message is |
| still displayed, initialize the USB device or |
| use other USB devices. |
Error 05: | The disc is unreadable. |
Blank Disc: | Nothing has been recorded on the MD. |
No Track: | No tracks are recorded on the MD, although it |
| has a title. |
Error 15: | Media was played that doesn’t have data |
| recorded that the unit can play. |
No Panel: | The faceplate of the slave unit being |
| connected to this unit has been removed. |
Error 77: The unit is malfunctioning for some reason.
➪Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center.
Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
➪Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center.
Hold Error: | The protective circuit in the unit activates |
| when the temperature inside the automatic |
| disc changer exceeds 60°C (140°F), stopping |
| all operation. |
| ➪ Cool down the unit by opening the |
| windows or turning on the air conditioner. |
| As the temperature falls below 60°C |
| (140°F), the disc will start playing again. |
No Name: | Attempted to display DNPS during the CD |
| play having no disc names preset. |
Load: | Discs are being exchanged in the Disc |
| changer. |
Reading: | The unit is reading the data on the disc. |
IN (Blink): | The CD player section is not operating |
| properly. |
| ➪ Reinsert the CD. If the CD cannot be |
| ejected or the display continues to flash |
| even when the CD has been properly |
| reinserted, please switch off the power |
| and consult your nearest service center. |
Protect (Blink): The speaker wire has a
➪Wire or insulate the speaker cable properly and press the reset button. If the "Protect" code does not disappear, consult your nearest service center.
Unsupported File:
An Audio file is played with a format that this unit can’t support.
➪
Copy Protection:
A
➪
38 English