Kenwood KDC-X7006 Station Preset Memory, Auto Memory Entry, Preset Tuning, Frequency Step Setting, Press button, Select the band, Select the band, 1Select the band

3Enter the frequencyPress the number buttons on the remote control.

Example:

Desired frequency	Press button
92.1 MHz (FM)	[0], [9], [2], [1]
810 kHz (AM)	[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

Station Preset Memory

Putting a station in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].

3Enter Preset Memory mode

Using the Control knob, select "P.MEM". For the operation method, refer to <Function Control mode> (page 10).

4Select the number to put in the memory Turn the Control knob.5Determine the number to put in the memory Press the Control knob.6Allow the determined number to take effect Press the Control knob.Cancelling the Preset Memory mode Press the [FNC] button.

⁄

•This function can be operated with [1] — [6] button.

- Press the desired [1] — [6] button for at least 2 seconds.

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].

2Open Auto Memory Entry

Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].2Enter Preset Tuning Select mode Turn the Control knob.3Select a desired station in the memory Turn the Control knob.

4Recall the station Press the Control knob.

Cancelling Preset Tuning

Press the [FNC] button.

⁄

•This function can be operated with [1] — [6] button. - Press the desired [1] — [6] button.

Frequency Step Setting

Changing the tuning frequency step.

The original setting is FM band 50 kHz, and AM band 9 kHz.

1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency stepWhile pressing the [1] and [5] buttons, press the [SRC] button.

Release your fingers from the button after the display appears.

The frequency step changes to FM band 200 kHz, and AM band 10 kHz.

⁄

•When the same operation is repeated, the frequency step returns to the original setting.

•When the frequency step is changed, the frequencies in the memory are deleted.

English 17