General features
Display Type F
G-Analyzer Stop Watch
The control of stop watch can be started by G- Analyzer function.
¤
• Do not use
1Enter G-Analyzer Stop Watch mode
Using the Control knob, select "DISP" > "GMA" > "STOP.W".
For the operation method, refer to <Function Control mode> (page 10).
"STOP WATCH" is displayed.
2Make the counter ready Press the Control knob. "Ready" is displayed.
3Start Count
When G in the vertical direction is detected during the travel, the count automatically starts. "Running" is displayed.
⁄
•You can also start the counter by pressing the Control knob.
4Stop Count
Press the Control knob. "Stop" is displayed.
⁄
•The control will start again when you accelerate or press the Control knob.
Do the operation after step2.
When you Reset the Count (While "Stop" is displayed)
Press the Control knob for at least 1 second.
⁄
• You can reset of count when the count is stopped.
5Exit G-Analyzer Stop Watch mode Press the [FNC] button.
⁄
•When Power off (ex; ACC OFF) while counting, the value of 1 second or less will be "00".
16 English
Display Type F
G-Analyzer Horsepower Analysis
This measures the horsepower and displays graph and max power. It automatically saves the highest record.
¤
•Do not use
•Do not use this product in any way that prevents you from driving safely.
•Follow all driving laws and use common sense when using this product.
⁄
•Before alternating
1Enter
For the operation method, refer to <Function Control mode> (page 10).
"HORSEPOWER" is displayed.
Previous max power and record are displayed.
2Begin measurement Press the Control knob. "Ready" is displayed.
3Start the car "Measure" is displayed.
After 15 seconds of measurement, the result is
displayed.
Display the result
The graph shows the variation in horsepower between 0.1 to 15.0 seconds. The maximum power is displayed in red and the markings provided at intervals of 5 seconds are displayed in blue.
¤
•Pressing the Control knob also begins the measurement. To prevent danger, push the control knob before starting the car.
4To display the maximum power in the section Push the Control knob towards right or left. Each time you push the Control knob, the maximum power in the section is displayed.