"CLASS G-AnalyzerCalibration setup, G-Analyzervehicle class setup, G-Analyzervehicle weight setup, input, > "CAL, General features, "HP SET" > "CLASS, "HP SET" > "WEIGHT, Turn the Control knob, 2 Select vehicle class, Press the [FNC] button"> Kenwood KDC-X891 G-AnalyzerCalibration setup, G-Analyzervehicle class setup, G-Analyzervehicle weight setup, input, > "CAL, Display, General features, "HP SET" > "CLASS
18
5
4
3
General features

Display Type F

 

2 Select the weight numbers

In Standby mode

 

 

Turn the Control knob.

G-Analyzer Calibration setup

 

 

 

 

 

⁄

G-Analyzer requires calibration for horizontal

 

 

 

 

• The weight input range is between 1000-9999 lbs.

acceleration and braking.

 

3 Select the digits to enter

⁄

 

 

 

Push the Control knob towards right or left.

• To ensure accurate calibration, go through the following

 

4 Repeat steps 2 and 3, and complete the weight

steps at a level place where you can move the vehicle

 

 

input.

straight ahead.

 

5 Exit G-Analyzer vehicle wight setup mode

1 Park the vehicle in a horizontal location

 

 

 

Press the Control knob.

2 Enter G-Analyzer Calibration setup mode

 

 

 

 

 

Using the Control knob, select "DISP" > "GMA"

 

 

 

> "CAL".

 

Display Type F

For the operation method, refer to <Function

 

 

In Standby mode

Control mode> (page 10).

 

 

G-Analyzer vehicle class setup

"G-CALIBRATION" is displayed.

 

 

Enter vehicle class to calculate horsepower.

Start Calibration of horizontal direction

 

 

 

 

Press the Control knob.

 

1 Enter G-Analyzer vehicle class setup mode

Once "Move Forward" appears on the display, the

 

 

Using the Control knob, select "DISP" > "GMA" >

vehicle must be advanced.

 

 

"HP SET" > "CLASS".

Start Calibration of straight direction

 

 

For the operation method, refer to <Function

Start moving the vehicle ahead.

 

 

Control mode> (page 10).

Calibration of straight direction automatically starts.

 

 

"CLASS SELECT" is displayed.

When the Calibration is finished, "Calibration OK" is

 

2 Select vehicle class

displayed.

 

 

Turn the Control knob.

⁄

 

 

Each time you push the knob, the vehicle class

• If you fail to complete the calibration, "No Calibration" is

 

 

alternates between the modes shown in the table

displayed. In such a case, repeat steps 1 through 4.

 

 

below.

Exit G-Analyzer Calibration setup mode

 

 

 

 

 

Display

Press the [FNC] button.

 

 

"Mid Size"

 

 

 

 

"Full Size"

 

 

 

 

"SUV"

Display Type F

 

 

"Van/ Mini-Van"

 

 

"Pickup Truck"

In Standby mode

 

 

"Sporty"

G-Analyzer vehicle weight setup

 

 

 

 

 

"Compact"

Enter vehicle weight to calculate horsepower.

 

3 Exit G-Analyzer vehicle class setup mode

1 Enter G-Analyzer vehicle weight setup mode

 

 

 

Press the Control knob.

Using the Control knob, select "DISP" > "GMA" >

 

 

 

"HP SET" > "WEIGHT".

 

 

 

For the operation method, refer to <Function

 

 

 

Control mode> (page 10).

 

 

 

"WEIGHT INPUT" is displayed.

 

 

 

English