Tuner features

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Select the band

Press the [FM] or [AM] button.

2Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

"– – – –" is displayed.

3Enter the frequency

Press the number buttons on the remote control.

Example:

Desired frequency

Press button

92.1 MHz (FM)

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

Station Preset Memory

Putting a station in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].

3Enter Preset Memory mode

Using the Control knob, select "P.MEM". For the operation method, refer to <Function Control mode> (page 10).

4Select the number to put in the memory Turn the Control knob.

5Determine the number to put in the memory Press the Control knob.

6Allow the determined number to take effect Press the Control knob.

Cancelling the Preset Memory mode Press the [FNC] button.

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].

2Open Auto Memory Entry

Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Enter Preset Tuning Select mode Turn the Control knob.

3Select a desired station in the memory Turn the Control knob.

4Recall the station Press the Control knob.

Cancelling Preset Tuning

Press the [FNC] button.

22 English