General features
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator blinks.
Audio Control
1Select the source to adjust Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
2Enter Audio Control mode Press the [VOL] knob.
3Select the Basic Audio item to adjust Press the [VOL] knob.
Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Basic Audio item Turn the [VOL] knob.
Adjustment Item | Display | Range |
Rear Volume | "REAR VOLUME" | 0 — 35 |
Subwoofer level | ||
System Q | "USER"/"ROCK"/ | User/Rock/Pops/Easy/Top |
| "POPS"/"EASY"/ | 40/Jazz/Natural |
| "TOP40"/"JAZZ"/ |
|
| "NATURAL" |
|
Bass level* | "BASS LEVEL" | |
Middle level* | "MIDDLE LEVEL" | |
Treble level* | "TREBLE LEVEL" | |
Balance | "BALANCE" | Left 15 — Right 15 |
Fader | "FADER" | Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
*You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page9).
*Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
⁄About System Q
•You can recall the best sound setting preset for different types of music.
•Change each setting value with the <Speaker Setting> (page 10). First, select the speaker type with the Speaker setting.
•"USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
5Exit Audio Control mode Press any button.
Press a button other than the [VOL] knob, [0] and [ATT] button.
8 English