Kenwood KDC-X891 Traffic Information, CRSC (Clean Reception System Circuit), Receive mode Setting, Electronic Serial Number (ESN) display, Display, Setting, Display, Setting

Other than Standby mode

Traffic Information

Switching to traffic information automatically when a traffic bulletin starts even when you aren’t listening to the radio.

Display	Setting
"TI : OFF"	The Traffic Information function is OFF.
"TI : ON"	The Traffic Information function is ON.

When a traffic bulletin starts, "Traffic INFO" is displayed it and it switches to traffic information.

⁄

•During reception of an AM station when the Traffic Information function is turned ON, it switches to an FM station.

•During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it’s automatically the remembered volume.

Receiving other traffic information stations (In tuner source)

Push the Control knob towards [4] or [¢].

⁄

•You can change the traffic information station when listening to the radio.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station.

Display	Setting
"CRSC : ON"	The CRSC is ON.
"CRSC : OFF"	The CRSC is OFF.

⁄

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

In HD Radio mode

Receive mode Setting

Sets the receive mode.

1Select the Receive mode Turn the Control knob.

Select the "Receive Mode" display.

2Enter Receive mode

Press the Control knob for at least 1 second.

3Set the Receive mode

Push the Control knob towards up or down. Each time you push the knob, the Receive mode alternates between the modes shown in the table below.

Receive mode	Display	Operation
Auto mode	"Auto"	Analog broadcasts and digital
		broadcasts will be switched
		automatically.
		When both are being transmitted,
		the digital broadcast will have
		priority.
Digital	"Digital"	Digital broadcasts only.
Analog	"Analog"	Analog broadcasts only.

4Exit Receive mode Press the [FNC] button.

⁄

•Even if the Receive mode is set to "Auto", when the Ball game mode program (non-delayed broadcast program) is received, the Receive mode will automatically switch to Analog broadcast only.

In Satellite radio source

Electronic Serial Number (ESN) display

Displaying the Electronic Serial Number.

Display

"ESN=************"

⁄

•Electronic Serial Number (ESN)

It is important to retain the unit serial number and the electronic Satellite radio Identification number for service activation and potential service changes.

English 39