General features
Speaker Setting
1Enter Standby
Press the [SRC] button. Select the "STANDBY" display.
Refer to <Selecting the Source> (page 7).
2Enter Speaker Setting mode Press the [VOL] knob.
"SP SEL" is displayed.
3Select the Speaker type Turn the [VOL] knob.
Each time you turn the knob, the setting alternates between the settings shown in the table below.
Speaker type | Display | |
OFF |
| "OFF" |
For 5 | & 4 in. speaker | "5/4inch" |
For 6 | & 6x9 in. speaker | "6x9/6inch" |
For the OEM speaker | "O.E.M." | |
4Exit Speaker Setting mode Press the [VOL] knob.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward down for at least 2 seconds.
Each time you push the knob, Subwoofer output switches ON and OFF.
When it is ON, "SUB WOOFER ON" is displayed.
TEL Mute
The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back ON.
10 English
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back ON.
⁄
•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 47).
Function Control mode
To set up various functions of this unit, select tree- structured function items.
1Enter Function Control mode Press the [FNC] button.
2Select your desired setup item
Select a setup item using the Control knob.
Operation type | Operation |
Movement between | Turn the Control knob. |
items |
|
Selection of item | Press the Control knob. |
Return to previous item Press the [FNC] button.
Functions of items are as follows:
Display | Icon |
| Function of setup item |
"Menu" | "MENU" | Allows you to set up the environment. Refer | |
|
|
| to <Menu system> (page 34). |
"Display Select" | "DISP" |
| Allows you to set up the display. Refer to |
|
|
| page 11 to page 18. |
"Angle Adjust" | "ANGLE" | Allows you to set the panel angle. Refer to | |
|
|
| <Angle Control> (page 19). |
"Preset Memory" "P.MEM" | Allows you to put stations in the memory. | ||
|
|
| Refer to <Station Preset Memory> (page |
|
|
| 22). |
"File Scan" etc. | "SCAN" |
| Allows you to set how to play the CD and |
| etc. |
| audio file. Refer to <Play function of CD |
|
|
| and Audio file> (page 28). |
"Return" | " | " | Returns to the previous item. |