Kenwood KDG119S, KDG2019V, KDG217S Messages shown below display your systems condition, Again LOAd

The messages shown below display your systems condition.

E-01 :No disc magazine has been loaded in the changer. The drsc magazine IS not completely loaded.

c:Load the drsc magazine properly. No CD in the untt.

c:Insert the CD.

E-02:No disc has been loaded in the disc magazrne. 1: Load a disc into the drsc magazine.

E-04:No disc has been loaded in the disc magazrne. 1: Load a drsc Into the disc magazrne.

The CD IS quote dirty. The CD IS upside-down. The CD IS scratched a lot.

ct Clean the CD and load it correctly.

E-l 0:Nothing has been recorded on the MD.

E-l 1:No tracks are recorded on the MD, although It has a title.

E-l 2.The faceplate of the slave unit being connected to this unit has been removed.

a: Replace It.

E-77The unrt is malfunctronrng for some reason

a:Press the reset button on the unrt If the “E-77” code does not disappear, consult your nearest servrce center

E-99.The unit IS malfunctrcnrng for some reason

8:Press the reset button on the unit. If the “E-99” code does not disappear, consult your nearest servrce center.

E-Od:	The protective	crrcuit	in the	unit activates when the
	temperature inside the automatic disc changer
	exceeds 60°C (14O”F), stopping all operation.
	r, Cool down the unit by opening the windows or
	turning on the air conditioner. As the temperature
	falls below 60°C (14O”F), the disc will start playrng
	again.
LOAd:	Discs are being	exchanged		in the Disc	changer
IN (Blink):	The CD player	section	IS not operating		properly.

I:Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.

- 23 -