“RDS Regional”

Sets whether to switch to the station only in the

 

 

specific region using the “AF” control.

 

 

“ON”/ “OFF”

 

 

 

“Auto TP Seek”

When traffic information station reception is

 

 

poor, automatically searches for a station that

 

 

can be received better.

 

 

 

 

“ON”/ “OFF”

 

 

 

 

(

 

: Factory setting)

5Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Remarks

News (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing “News 00min” to “News 90min” turns this function ON. If news bulletin starts when this function is ON, “News” is displayed and news is received. If “20min” is has been set, reception of another news bulletin will not start for 20 minutes. The news bulletin volume is the same level that was set for Traffic Information.

Forced MONO

Strong electrical fields (such as from power lines) may cause unstable sound quality when it is set to ON. In such a situation, turn it OFF.

Station Preset Memory

Putting a station in the memory.

1Select the radio band and tune in a desired radio station you wish to store in the preset memory

2Enter Menu List mode Press the [MENU] button.

3Enter Preset Memory mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “List & Memory”.4Select the number to put in the memory

Turn the [Volume] knob and press it for at least 2 seconds when the desired item is displayed. Select the preset number.

Display

Overview

“List & Memory”

 

 

“-1”

Preset number 1.

 

“-2”

Preset number 2.

 

 

 

“-6”

Preset number 6.

English 23