Clock and Other Functions

Demonstration Mode Setting

Turning the demonstration mode ON/OFF.

1Enter Menu List mode Press the [MENU] button.

2Enter Demonstration mode setting

Turn the [Volume] knob and press it when the desired item is displayed.

Select “DEMO Mode”.3Set the Demonstration mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “ON” or “OFF”.

4Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Muting Volume upon Reception of Phone Call

The audio system automatically mutes when a call comes in.

When a call comes in “CALL” is displayed.

The audio system pauses.

Listening to the audio during a callPress the [SRC] button.

The “CALL” display disappears and the audio system comes back ON.

When the call endsHang up the phone.

The “CALL” display disappears and the audio system comes back ON.

⁄

•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 68).

Activating Security Code

⁄

•You can set the Security Code with a 4 digit number of your choice.

•The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.

1Select the Standby

Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “STANDBY” display.

✍❜SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.

2Enter Menu List mode Press the [MENU] button.

3Enter Security Code mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “Initial Settings” > “Security Set”.

When “Enter” is displayed, “– – – –” is also displayed.

4Enter Security Code

1.Turn the [Volume] knob and press it when the desired item is displayed.

Select the digit.

2.Turn the [Volume] knob to select the numbers, and then press the [Volume] knob.

5Confirm the Security Code

Press the [Volume] knob for at least 2 seconds. When “Re-Enter” is displayed, “– – – –” is also displayed.

6Do the step 4 through 5 operation, and reenter the Security Code.

“Approved” is displayed.

The Security Code function activates.

⁄

•If you enter the wrong Code in steps 4 through 5, repeat from step 4.

7Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

38 KIV-700