Kenwood KIV-700 Display, Overview, Make a setting, 5Make a setting, Initial Settings, 1Select the Standby, Exit Menu List mode, 6Exit Menu List mode

Initial Settings

You can select following Initial Setting items.

1Select the Standby

Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “STANDBY” display.

✍❜SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.

2Enter Menu List mode Press the [MENU] button.

3Enter Initial Setting mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “Initial Settings”.

4Select the setting item to adjust

Turn the [Volume] knob and press it when the desired item is displayed.

Display		Overview
“Initial Settings”
	“Security Set”	Sets/Resets security code.
	“Security Clear”	- Activating Security Code (page 38)
		- Deactivating Security Code (page 39)
	“Source Select”	Sets the source selection method.
		“1”/ “2”
	“Beep”	Setting the operation check sound (beep sound)
		ON/OFF.
		“ON”/ “OFF”
	“Russian”	When this is set to ON, the following character
		strings are displayed in Russian:
		Folder name/ File name/ Song title/ Artist
		name/ Album name/ KCA-BT300/BT200
		(optional accessory)
		“ON”/ “OFF”
	“Menu Language	You can select the display language for the
	Select”	Menu list item.
		“English”/ “Français”/ “Español”/ “Deutsch”/
		“Italiano”/ “Pyccкий”
	“Power OFF Wait”	Setting the timer to turn this unit’s power OFF
		automatically when Standby mode continues.
		Using this setting can save the vehicle’s battery
		power.
		“-----”/: Power OFF Timer function is OFF.
		“20min”/ “40min”/ “60min”: Turns the power
		OFF after minutes.

“Built in AUX”	When this is set to ON, AUX source can be
	selected.
	“ON”: Allows AUX source to be selected. Use
	this setting when the built-in AUX terminal
	is connected to the external equipment all
	the time.
	“OFF”: Disable AUX source selection. Use this
	setting when the built-in AUX terminal is
	not used.
“Favorite Delete”	Deletes Favorite Preset Memory.
	Refer to <Favorite Preset Memory Delete>
	(page 49).
“Built in AMP”	Selecting “OFF” turns off the built-in amplifier.
	Turning off the built-in amplifier improves the
	quality of the sound from Preout.
	“ON”/ “OFF”
“AV Out Set”	Changes the iPod setting from AV Output to
	output-only terminal.
	“ON”/ “OFF”
“System F/W	Updates the firmware. The update information
Update”	will be posted on the following URL as
	necessary.
	www.kenwood.com/cs/ce/
	(	: Factory setting)

5Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

English 37