Kenwood KIV-700 Select the digit, 5Input the PIN code, Enter Bluetooth mode, 1Enter Bluetooth mode, 8Exit BT Setting mode, 6Transmit the PIN code, 2.Select a device name

Registering Bluetooth Device

To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit.

Registering from this unit

1Enter Bluetooth mode

Press the [TI] button for at least 1 second.

2Enter Bluetooth device registration mode Turn the [Volume] knob and press it when the desired item is displayed.

Select “BT Settings” > “Detailed Setup” > “Device Registration”.

Search for the Bluetooth device.

When search is completed, “Finished” is displayed.

3Select a Bluetooth device

Turn the [Volume] knob and press it when the desired item is displayed.

4“Pairing” is displayed (KCA-BT300 only)

If “Pairing Success” is displayed, proceed to step 7. If “PIN Code NG” is displayed, proceed to steps 5.

5Input the PIN code

1.Turn the [Volume] knob and press it when the desired item is displayed.

Select the digit.

2.Turn the [Volume] knob to select the numbers, and then press the [Volume] knob.

6Transmit the PIN code

Press the [Volume] knob for at least 1 second. If “Pairing Success” is displayed, registration is completed.

✍❜If the error message appears even though the

PIN code is correct, try <Registering Special Bluetooth device>.

7Return to the device list Press the [Volume] knob.

8Exit BT Setting mode

Press the [MENU] button for at least 1 second.

⁄

•This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device.

•If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.

Registering Special Bluetooth device

Allow registration of a special device that cannot be registered normally (pairing).

1.Select Special device registration mode Turn the [Volume] knob and press it when the desired item is displayed.

Select “BT Settings” > “Detailed Setup” > “Special Device Select”.

A list is displayed.

2.Select a device name

Turn the [Volume] knob and push the center when the desired device name is displayed. If “Completed” is displayed, registration is completed.

3.Go through the procedure step 3 of <Registering from this unit> and complete the registration (pairing).

Cancelling Special device registration mode

Press the [MENU] button for at least 1 second.

⁄

• If the device name is not in the list, select “Other Phones”.

English 51