Manuals / Brands / Home Audio / Home Theater System / Kenwood / Home Audio / Home Theater System

Kenwood KIV-700 Removing the hard rubber frame, CAUTION, ¤CAUTION, Installation, Removing the Unit

1 76

Download 76 pages, 3.92 Mb

Removing the hard rubber frame

1 Engage the catch pins on the removal tool and remove the two locks on the upper level.

Lift up and pull the frame forward as shown in the figure.

Lock

Catch

Accessory 2 Removal tool

2 When the upper level is removed, remove the lower two locations.

⁄

• The frame can be removed from the bottom side in the same manner.

Removing the Unit

1 Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame.

2 Insert the two removal tools deeply into the slots on each side, as shown.

3 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

Accessory 2

¤

• Be careful to avoid injury from the catch pins on the removal tool.

4 Pull the unit all the way out with your hands, being careful not to drop it.

Installation/Removing the Unit

Installation

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

¤CAUTION

Install this unit in the console of your vehicle.

Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

70 KIV-700

Contents

Page Before Use Component Names and Functions General Operation iPod/iPhone Operation 2WARNING To prevent injury or fire, take the following precautions: Do not use this unit before canceling Demonstration mode How to reset your unit Notes 1[MENU] button 2[DISP] button 3[Volume] knob 4[SEARCH MODE] button 5Auxiliary Input Terminal Exit of the Demonstration Mode Power and Source Select Volume Menu List Operation 1Select the source SRC MENU Volume DISP SEARCH MODE Playing iPod • Connect an iPod • Select iPod source Song Select Selecting a Song by Browsing iPod Items 1Select iPod source 3Turn the [Volume] knob and press it when the desired item is displayed Select “Music” or “Videos” Select “Play Mode” 4Select the Play Mode Overview 5Make a setting 6Exit Menu List mode Selecting the Search Mode Search mode in Normal playing Search mode in Browsing 2Enter Search mode Press the [SEARCH MODE] button Direct Search 3Enter Direct Search mode Select “Direct Search” 4Select the browse item Turn the [Volume] knob and press it when the desired browse item is selected Alphabet Search Select “Music” or “Videos” > category > brows item Select “Alphabet Search” 4Search for item Cancelling the Alphabet Search My Playlist Registering Songs in the Playlist 1Play the song you want to register 2Press the [SEARCH MODE] button 3Register the song Page Playing USB device • Connect a USB device Moving to the next folder (Except for Music Editor media) Remove USB device Multi card reader Drive Search File Search USB device/ Internal memory source Music Editor media DisplayItems 1Select USB/ Internal memory source 1Enter Direct Music Search mode Press the [DIRECT] button on the remote control 2Enter the music number Press the number buttons on the remote control 3Search the music Copying from USB device 3Enter Copy mode Select “Copy from USB” 4Select a file or folder to copy 5Determine the selected file or folder Deleting Files in Memory Internal Memory Format 1Select Internal memory source 3Enter Internal memory Format mode Select “YES” To select a file Press the Slide show Press the [MENU] button for at least 1 second to move to the first hierarchy Exit Menu List mode Select CD changer source Moving to the next disc Press the [DISP] button to select display mode 1Select CD changer source Direct Disc Search 1Enter Direct Disc Search mode 2Enter the disc number 3Search the disc Press the [FM+] or [AM–]button SRC MENU Volume SEARCH MODE Selecting Tuner source Selecting the Receiving Band Selecting the Receiving station Station Preset Memory 3Enter Preset Memory mode Select “List & Memory” 4Select the number to put in the memory Auto Memory Entry 1Select the radio band you wish to store in the preset memory 3Enter Auto Memory Entry mode Select “Settings” > “Auto Memory” 4Open Auto Memory Entry PTY (Program Type) Program Type Preset Presetting the Program Type 3Select the number to put in the memory Recalling the preset Program Type Connecting a Bluetooth Device 1Turn on this unit Press the [SRC] button 2Start registering this unit by operating the Bluetooth device 3Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device Page Connecting a Bluetooth Device Call Waiting Answering Another Incoming Call with the Current Call Suspended Select “Answer” Answering another Incoming Call after Terminating the Current Call Continuing the Current Call Calling a Number in the Phone Book 2Select the Phone Book mode Select “Phonebook” 3Select the character to be searched for 5Make a call Make a Voice Dialing Call 1Enter voice recognition mode Press the [VOL] button for at least 1 second 2“Phonebook Name?” is displayed 3“Phonebook Type?” is displayed Text scroll Press the [DISP] button for at least 1 second Display Setting Select the source Enter Display Setting mode Illumination Color Selection Select “Settings” > “Display & Illumination” > “Key Color Select” 3Select the Illumination Color Creating “User” color Select the color to adjust. (red, green, or blue) Customization of Display 1 Select the source Text Display Selection Enter Menu List mode Enter Display Setting mode and Select the Auxiliary Input Display Setting 1Select the AUX source Select “Settings” > “Name Set” 4Select the Auxiliary input display Turn the [Volume] knob Clock and Date Adjustment Select “Settings” > “Clock & Date” > “Time Synchronized” > “ON” or “OFF” 3Enter Clock adjustment mode Select “Clock Adjust” 4Adjusting Clock and Time zone Initial Settings 1Select the Standby 3Enter Initial Setting mode Select “Initial Settings” Demonstration Mode Setting 2Enter Demonstration mode setting Select “DEMO Mode” 3Set the Demonstration mode Select “ON” or “OFF” Deactivating Security Code Enter Audio Control mode Press the [Volume] knob Make a setting Exit Audio Control mode Remarks Audio Control Preset Equalizer Curve Select Equalizer curve 1Enter Audio Control mode Press the [Volume] knob 2Enter Preset Equalizer mode Select “Equalizer” > “Preset Equalizer” Listening Position Selection Compensation seat 2Enter Preset position setting mode Select “Position” > “Preset Position” Listening Position Fine Adjustments Dual Zone System 2Enter Audio Control mode Press the [Volume] knob Select “Detailed Setup” 6Exit Audio Control mode Car Type Selection 2Enter Car Type select mode Select “Detailed Setup” > “Car Type” 3Select the car type Speaker Setting Car Type Fine Adjustments 2Enter Car Type Adjustment mode X’Over Setting 2Enter X’Over setting mode Select “Detailed Setup” > “X’Over” 3Select the speaker you want to set Select “Front”, “Rear”, or “Subwoofer” Audio Preset Recall 2Enter Audio preset recall mode Select “Detailed Setup” > “Preset” > “Preset Recall” Favorite Preset Memory 1Display a favorite item Source Registerable items 3Select the number to put in the memory Turn the [Volume] knob Favorite Preset Memory Delete Bluetooth Setting 2Turn the [Volume] knob and press it when the desired item is displayed Select “BT Settings” 5Exit BT Setting mode Registering Bluetooth Device Registering from this unit Select “BT Settings” > “Detailed Setup” > “Device Registration” 3Select a Bluetooth device 4“Pairing” is displayed (KCA-BT300only) Registering PIN Code 2Enter PIN code edit mode Select “BT Settings” > “Detailed Setup” > “PIN Code Edit” 3Input the PIN code 4Register a PIN code Deleting a Registered Bluetooth Device 2Enter Bluetooth device deletion mode Select “BT Settings” > “Detailed Setup” > “Device Delete” 4Delete the selected Bluetooth device Press the [Volume] knob 6Exit BT Setting mode Adding a Voice Dialing Command 2Enter Phone book name edit mode Select “BT Settings” > “Voice Tag” > “Phonebook Name Edit” 3Search for the name to register 4Select a mode Setting a Voice Command for Category 2Enter Phone Number type edit mode Select “BT Settings” > “Voice Tag” > “Phonebook Type Edit” Select “General”, “Home”, “Office”, “Mobile”, or “Other” Register the category (type) by performing steps 5 to 7 in Downloading the SMS 2Enter SMS download mode Select “BT Settings” > “SMS Download” 3Start downloading Press the [Volume] knob. “SMS Downloading” is displayed 4Exit BT Setting mode Page General control In Tuner source In USB/ Internal Memory source In iPod source Changing the battery of the remote control unit ¤CAUTION About Audio file About Picture files iPod/iPhone that can be connected to this unit About Video files About USB device About USB hub About “KENWOOD Music Editor” Menu List Function items appearing when the USB source is selected Function items appearing when the Music Editor media source is selected Function items appearing when the Internal memory source is selected Function items appearing when the Disc changer source is selected Function items appearing when the Tuner source is selected Display Indicator items Continent City Page About CD players/disc changers connected to this unit Page Connector Function Guide Connecting the ISO Connector Removing the hard rubber frame General Tuner source Audio file source Hands-free Bluetooth audio source The messages shown below display your systems condition Page FM tuner section MW tuner section LW tuner section USB Interface Monitor section Audio/ Video section Auxiliary input Declaration of Conformity with regard to the EMC Directive 2004/108/EC