Listening to radio broadcasts
Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “1”. Therefore, be sure to execute the RDS auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations. |
|
See “Presetting RDS stations (RDS AUTO MEMORY)”. | ∞ |
MEMORY
MULTI CONTROL
1Tune to the station you want to store.
2Press the MEMORY key while receiving the station.
Blinks for 20 seconds
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again.)
3Use the MULTI CONTROL knob or MULTI CONTROL %/ fikeys to select one of the station presets (1 – 40).
4Press the MEMORY key again to confirm the setting.
•Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
•If you store a station at a previously used preset, the previous station will be replaced by the new one.
Receiving preset stations
TUNER 
Numeric keys 
1Press the TUNER key to select tuner as the source.
2Enter the number of the preset station you want to receive (up to “40”).
Press the Numeric keys in the following order:
For “15”, press ................................ | 0, 5 |
For “20”, press ................................ | 0, 0, ) |
•If you make a mistake entering a two digit number, press the +10 key repeatedly to return to the original display and start again.