Preparing for surround sound

5When the “CUSTOM” has been selected.

1 For general speaker setting, use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select “CUSTOM” and press the SETUP key again.

• The Subwoofer setting indication “SUBW ON” appears.

8Use the MULTI CONTROL knob or MULTI CONTROL %/fikeys to select the appropriate Surround speaker setting.

If you have selected “LRG” as the Center speaker setting:

1 SURR NML (normal) : Average size Surround speakers are

connected to this model.

2SURR LRG (large) : Large Surround speakers are connected

to this model.

3 SURR OFF : Surround speaker setting mode to this model is OFF.

2Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select the appropriate Subwoofer setting.

1 SUBW ON : Subwoofer setting mode to this model is ON.

2 SUBW OFF : Subwoofer setting mode to this model is OFF.

•The initial setting is “SUBW ON”.

•When the setting “SUBW OFF” is selected, the Front speakers are automatically set to “FRNT LRG” and the procedure skips to step 5.

Before step 5, press the SETUP key to accept the setting.

•When Subwoofer output sound is required, select “FRNT NML”.

3Press the SETUP key to accept the setting.

• The Front speakers setting indication “FRNT LRG” appears.

4Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select the appropriate Front speakers setting.

1 FRNT LRG (large) : Large Front speakers are connected

to this model.

2 FRNT NML (normal) : Average size Front speakers are connected to this model.

•For “FRNT LRG” selection, no sound will be heard from Subwoofer speaker even when it is set to ON. However, if you select “SW RE-MIX ON” when Subwoofer is selected, you will be able to hear sound from the Subwoofer.

When in STEREO mode, the sound goes directly to Front speaker.

5Press the SETUP key to accept the setting.

• The Center speaker setting indication “CNTR NML” appears.

6Use the MULTI CONTROL knob or MULTI CONTROL %/fikeys to select the appropriate Center speaker setting.

If you have selected “LRG” as the Front speakers setting:

1 CNTR NML (normal) : An average size Center speaker is

 

 

connected to this model.

2

CNTR LRG (large)

: A large Center speaker is connected to

 

 

this model.

3

CNTR OFF

: Center speaker setting mode to this

 

 

model is OFF.

If you have selected “NML” as the Front speakers setting:

1 CNTR NML (normal) : An average size Center speaker is

 

connected to this model.

2 CNTR OFF

: Center speaker setting mode to this

 

model is OFF.

7Press the SETUP key again to accept the setting.

•The Surround speaker setting indication “SURR NML” appears.

If you have selected other than “LRG” as the Center speaker setting:

1SURR NML (normal) : Average size Surround speakers are connected to this model.

2 SURR OFF

: Surround speaker setting mode to this

 

model is OFF.

•When the setting “SURR OFF” is selected, the procedure skips to step !.

9Press the SETUP key to accept the setting.

• The Surround Back speaker setting indication “BS” appears.

0Use the MULTI CONTROL knob or MULTI CONTROL %/fikeys to select the appropriate Surround Back speaker setting.

If you have selected “LRG” as the Surround speaker setting:

1 BS NML (normal) : Average size Surround Back speaker is

connected to this model.

2 BS LRG (large) : Large Surround Back speaker is connected to this model.

3 BS OFF: Surround Back speaker setting mode to this model is OFF.

If you have selected “NML” as the Surround speaker setting:

1

BS NML (normal)

: Average size Surround Back speaker is

 

 

connected to this model.

2

BS OFF

: Surround Back speaker setting mode to

 

 

this model is OFF.

(KRF-V6100D only)

If you have selected “NML” or “LRG” as the Surround Back speaker setting:

1 SPEAKER : Surround Back signal will be output from

SURROUND BACK speaker terminal and PRE OUT

SURR BACK L/SURR BACK jack as monaural.

2 PRE OUT : Surround Back signals will be out put from PRE OUT SURR BACK L/SURR BACK and PRE OUT SURR BACK R jacks as stereo.

!Press the SETUP key again to accept the setting.

•The Subwoofer re-mix setting indication “SW RE-MIX” scrolls across the display.

•If Subwoofer is turned OFF, Subwoofer re-mix setting is not visible.

@Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select the appropriate Subwoofer re-mix setting.

1 RMX ON : Subwoofer re-mix set mode to this model is ON.

2 RMX OFF : Subwoofer re-mix set mode to this model is OFF.

#Press the SETUP key to accept the setting.

Continued to next page

17 EN