Kenwood B60-5632-00 00 MA (E, X) AP 0602, KRF-V5100D, KRF-V6100D Specifications (For Europe), 35 EN

Specifications (For Europe)

Caution: Read this page carefully to ensure safe operation.

AUDIO section

Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω)

...............................................................................		100 W + 100 W
Effective power output during STEREO operation
RMS(1 kHz, 10% T.H.D., at 6 Ω) ..............................		120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ...		100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ....		120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ...................		100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ....................		120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ...		100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ....		120 W + 120 W
SURROUND BACK (KRF-V6100D)
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ...................		100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ....................		120 W
Total harmonic distortion .........................	0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
CD/DVD .....................................	20 Hz ~ 70 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD .................................................................................		95 dB
Input sensitivity / impedance		550 mV / 47 kΩ
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 ....
DVD/6CH INPUT ..................................................		550 mV / 15 kΩ
Output level / impedance.......................................................		550 mV / 1 kΩ
MD/TAPE REC
PRE OUT (SUBWOOFER) ......................................		1.5 V / 2.2 kΩ
PRE OUT (SURROUND BACK) ..............................		1.5 V / 2.2 kΩ
Tone control
BASS ................................................................	±10 dB (at 100 Hz)
TREBLE ............................................................	±10 dB (at 10 kHz)
Loudness control
VOLUME at –30 dB level ......................................		+8 dB (100 Hz)

DIGITAL AUDIO section

Sampling frequency	...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ...........................	(–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial ...................................................................	0.5 Vp-p / 75 Ω

VIDEO section

VIDEO inputs / outputs .................................................	1 Vp-p / 75 Ω
VIDEO (composite)
S-VIDEO inputs /outputs (KRF-V6100D)			Ω
S-VIDEO (luminance signal) ..................................	1 Vp-p / 75
S-VIDEO (chrominance signal) .......................	0.286	Vp-p / 75	Ω
COMPONENT VIDEO inputs /outputs (KRF-V6100D)			Ω
COMPONENT VIDEO (luminance signal) .............	1	Vp-p / 75
COMPONENT VIDEO (CB/CR-signal) .................	0.7	Vp-p / 75	Ω

FM tuner section

Tuning frequency range	.................................	87.5 MHz ~ 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .....................	1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ...................	45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO ..........................................................		0.2% (71.2 dBf input)
STEREO .......................................................		0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO .................................	65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ..............................	60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ...................................................		36 dB
Selectivity (±300 kHz) .................................................................		64 dB
Frequency response (30 Hz ~ 15 kHz) ....................		+0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range ....................................	531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) ........	16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input)
.................................................................. 50 dB (60 dBµV EMF input)

GENERAL

Power consumption .................................................................		280 W
Standby Power consumption ...................................	less than 0.9 W
AC outlet
SWITCHED ......................................................	2 (total 90 W max.)
Dimensions ....................................................	W: 440 mm	(17-5/16")
	H : 143 mm	(5-5/8")
	D : 303 mm (11-15/16")
Weight (Net) ..............................................................	7.8 kg (17.2 lb)

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

35 EN