Names and functions of parts

Main unit

PTY indicator AUTO indicator

Speaker indicator RDS indicator

CLIP indicator

MUTE indicator

LOUDNESS indicator

TONE indicator

TUNED indicator

ST. indicator

Input channel indicators

*The Input channel indicators light up to indicate the channels contained in the input signal. The “S” indicator lights when the surround component consists of a single channel.

Frequency display,

AUTO DETECT

 

Input display,

 

Preset channel display,

indicator

 

Surround mode display

DIGITAL indicator

DSP MODE

 

Band indicators

indicator

6CH INPUT indicator

 

 

 

 

DTS indicator

 

 

 

DISCRETE 6.1

 

 

 

indicator

DOLBY DIGITAL

 

MATRIX 6.1

 

indicator

 

 

NEO:6

indicator

 

 

 

PRO LOGIC

indicator

 

Display

indicator

 

 

 

 

 

VOLUME CONTROL

STANDBY

ON/STANDBY

SPEAKERS ON/OFF

 

 

 

 

DIMMER

LISTEN MODE

 

 

DOWN

UP

 

 

 

 

 

ACTIVE EQ

DTS DOLBY DIGITAL

MULTI CONTROL

INPUT SELECTOR

 

POWER

 

 

 

 

 

 

 

SOUND

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

OFF

 

 

 

 

 

MUTE

 

 

ACTIVE EQ

INPUT MODE BAND

AUTO/MONO MEMORY

SETUP

 

 

PHONES

 

 

1 POWER ON/OFF key

^

Use to turn the main power ON/OFF.

 

2 ON/STANDBY

 

key

^

 

 

Use to switch the power ON/STANDBY when the POWER is turned ON.

STANDBY indicator

3 DIMMER key

 

Use to select the REC MODE.

¡

Use to adjust the brightness of the display.

 

4 LISTEN MODE key

Use to select the listening mode.

5 Surround LED (light-emitting diode)

indicators

 

ACTIVE EQ mode LED indicator

)

Lights when this model is in the ACTIVE EQ mode.

DTS mode LED indicator

Lights when this model is in the DTS mode. DOLBY DIGITAL mode LED indicator Lights when this model is in the Dolby Digital mode.

6 SOUND key

º % AUTO/MONO key

 

Use to adjust the sound quality

and the

Use to change “TAPE” indication to “MD”.

ambience effects.

 

Use to select the auto tuning mode.

(

7 MULTI CONTROL knob

^

Use to control a variety of settings.

 

^ MEMORY key

£

8 INPUT SELECTOR knob

(

Use to store radio stations in the preset

Use to select the input sources.

 

memory.

 

9 VOLUME CONTROL knob

( & SETUP key

^

0 PHONES jack

)

Use to select the speakers' settings etc.

Use for headphone listening.

 

* MUTE key

)

! SPEAKERS ON/OFF key

(

Use to temporarily mute the sound.

 

Use to turn the speakers ON/OFF.

 

 

 

@ ACTIVE EQ key

)

 

 

Use to select ACTIVE EQ setting.

 

 

 

# INPUT MODE key

8

 

 

Use to switch between full auto, digital and

 

 

analog inputs.

 

 

 

$ BAND key

 

 

Use to select the broadcast band.

Standby mode

While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.

6EN