Specifications (For Australia)

Caution: Read this page carefully to ensure safe operation.

AUDIO section

Rated power output during STEREO operation

100 watts per channel minimum RMS, both channels driven, at 8

from

40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

 

 

DIN/IEC (63 kHz ~ 12.5kHz, 0.7% T.H.D., at 8 Ω)

 

...............................................................................

100 W + 100 W

Effective power output during STEREO operation

 

RMS (1 kHz, 10 % T.H.D. at 8 Ω) .............................

120 W + 120 W

Effective power output during SURROUND operation

 

FRONT

 

 

 

(1 kHz, 0.7% T.H.D. at 8Ω one channel driven)

..... 100 W + 100 W

(1 kHz, 10% T.H.D. at 8Ω one channel driven) ......

120 W + 120 W

CENTER

 

 

 

(1 kHz, 0.7% T.H.D. at 8Ω one channel driven) ........................

100 W

(1 kHz, 10% T.H.D. at 8Ω one channel driven) .........................

120 W

SURROUND

 

 

 

(1 kHz, 0.7% T.H.D. at 8Ω one channel driven)

..... 100 W + 100 W

(1 kHz, 10% T.H.D. at 8Ω one channel driven) ......

120 W + 120 W

SURROUND BACK (KRF-V6100D)

 

 

(1 kHz, 0.7 % T.H.D. at 8 Ω one channel driven) ...................

100 W

(1 kHz, 10 % T.H.D. at 8 Ω one channel driven)

....................

120 W

Total harmonic distortion ...........................

0.05% (1 kHz, 50 W, 8Ω)

Frequency response (IHF’66)

 

 

 

CD/DVD ......................................

20 Hz ~ 70 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

 

 

 

CD/DVD .................................................................................

 

95 dB

Input sensitivity / impedance

....

550 mV / 47 kΩ

CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2

DVD/6CH INPUT .................................................

550 mV / 15 kΩ

Output level / impedance........................................................

550 mV / 1 kΩ

MD TAPE REC

 

PRE OUT (SUBWOOFER) ......................................

1.5 V / 2.2 kΩ

PRE OUT (SURROUND BACK) ..............................

1.5 V / 2.2 kΩ

Tone control

 

 

 

BASS ................................................................

±10 dB (at 100 Hz)

TREBLE ............................................................

±10 dB (at 10 kHz)

Loudness control

 

 

 

VOLUME at -30dB level ...................................

+8 dB (at 100 Hz)

DIGITAL AUDIO section

Sampling frequency

...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz

Input level / impedance / wave length

Optical ...........................

(–15 dBm ~ –21 dBm), 660 nm ±30 nm

Coaxial ...................................................................

0.5 Vp-p / 75 Ω

VIDEO section

VIDEO inputs / outputs .................................................

1 Vp-p / 75 Ω

VIDEO (composite)

S-VIDEO inputs /outputs (KRF-V6100D)

 

Vp-p / 75 Ω

S-VIDEO (luminance signal) ..................................

1

S-VIDEO (chrominance signal) .......................

0.286

Vp-p / 75 Ω

COMPONENT VIDEO inputs/outputs (KRF-V6100D)

 

Vp-p/75 Ω

COMPONENT VIDEO (luminance signal) ...............

1

COMPONENT VIDEO (CB/CR-signal) ...................

0.7

Vp-p/75 Ω

FM tuner section

Tuning frequency range ................................. 87.5 MHz ~ 108.0 MHz

Usable sensitivity (MONO)

................... 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)

50dB quieting.....................................................sensitivity

28 µV (75 Ω)/ 40.2 dBf

STEREO

Total harmonic distortion (1 kHz)

MONO ..........................................................

0.5% (71.2 dBf input)

STEREO .......................................................

0.7% (71.2 dBf input)

Signal to noise ratio (1 kHz, 75 kHz DEV.)

MONO ........................................................

75 dB (71.2 dBf input)

STEREO .....................................................

68 dB (71.2 dBf input)

Stereo separation (1 kHz) ...........................................................

40 dB

Selectivity (±400 kHz) .................................................................

50 dB

Frequency response ....................

(30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range .....................................

531 kHz ~ 1,602 kHz

Usable sensitivity (30% mod., S/N 20dB) .........

16 µV / (600 µV/m)

Signal to noise ratio (30% mod., 1 mV input)

 

.......................................................... 50 dB (60 dBµV EMF input)

GENERAL

Power consumption ...................................................................

280W

Standby Power consumption ...................................

less than 1.3 W

AC outlet

 

 

SWITCHED ................................................

1 (total 90 W max.)

Dimensions ....................................................

W :

440 mm (17-5/16")

 

H :

143 mm (5-5/8")

 

D : 303 mm (11-15/16")

Weight (Net) ..................................................................

7.8 kg (17.2 lb)

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

Model

Serial Number

36 EN