Displaying the CD TEXT data

10

When you connect a KENWOOD CD player (CD-425M, CD-4700M, CD- 4260M, DPF-J6030), you can display the CD TEXT data in the display of the remote control unit.

Display operation 1 5/°

Display operation 2

+ +

– –

Before operation, regiser the setup code of the CD player.1Load the CD TEXT data to the CD player.1Press the MUSIC key to select "CD".2Press the [Menu] key repeatedly until "SetUp" appears in the display.3 Press the 5/°keys to select "All Read" and press the [Enter] key.

• The loading time may take a few moments.

2Load the CD TEXT data of the CD player to the remote control unit.

1Press the MUSIC key to select "CD".

2Press the [Menu] key repeatedly until "SetUp"s appears in the display.3 Press the 5/° keys to select "Disc Title" and press the [Enter] key.

•The remote control unit starts reading the CD TEXT data (disc titles are also read).

• appears during reading.

3Press the [Home] key.

•"Text" appears when the CD TEXT data is read.

CD/DVD

CD

Text Menu

• When "Text" does not appears, select "Track Title" in the "SetUp" display and press the [Enter] key.

Getting the most from your remote control

4Press the [Text] key.

• The display for selecting disc appears.

>050.D.Title >051.

Home Sel

5Press the 5/°keys to select the desired disc, then press the [Sel] key.

>01.T.Title >02.T.Title Back Sel

6Press the 5/°keys to select the desired track, then press the [Sel] key.

Control Remote