Kenwood KRF-V8030D, B60-4611-00 To delete the setup code, Executing an automatic operation, MUSIC, ", TV, MUSIC, MOVIE, MUSIC, ", MOVIE, Press the, 6Press [Enter], 1Press the MACRO key

		Getting the most from your remote control
Executing an automatic operation		To delete the setup code
			7
MACRO	MUSIC, MOVIE,	Display operation 1	5/°
		Display operation 2
	TV
+	+	+	+
–	–
		–	–

During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.

During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.

1Press the MACRO key.

• “MACRO EXE” appears in the display.

MACRO EXE

Select MACRO

Menu

2Press the MUSIC, MOVIE, or TV key to execute the corresponding macro play.

• "MACRO EXE" appears in the display and the pre-programmed macro is performed:

MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"

•Some devices take up to 1 second to power on. The macro function has an automatic delay after any power function output.

•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro program mode.

MACRO1 EXE

Select MACRO

Menu

When MUSIC is pressed

1Press the display operation 1 key repeatedly until “Menu” appears in the display.

Video1:

VCR

Menu

2Press the [Menu] key repeatedly until “01.IR” appears in the display.

•The setup display appears.

>01.IR

>02.Surround Home Enter

3Press the 5/°keys to select “01.IR,” then press the [Enter] key.

•The input selecting display appears.

>03.Video1 >04.Video2 Back Enter

4Press the 5/°keys to select the input that you want to delete, then press the [Enter] key.

5Press the 5/°keys to select “Delete.”

>13:Delete >01:CD Back Enter

6Press [Enter].

•The setup code is deleted.

Remote Control