2Register the setup codes for your audio and video components
Step 1
| Press the display operation 1 key re- |
Video1: | peatedly until “Menu” appears in the dis- |
VCR | play. |
Menu |
|
Step 7
Press the 5/°keys to select the setup
>01:0056 code. >02:Nothing
Back Enter
For step 1 through step 9, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.
Step 2
| Press the display operation 2 [Menu] |
>01.IR | key repeatedly until “01.IR” appears in |
>02.Surround | the display. |
Home Enter |
|
Step 3
| Press the 5/°keys to select “01.IR”, |
>01.IR | then press the display operation 2 |
>02.Surround | [Enter] key. |
Step 8
AV.POWER
Press the AV.POWER | key to see if |
you can turn the component on and off.
If your component has a mechanical POWER switch that cannot be operated by remote control unit, press the display operation 2 [Enter] key and display operation 1 [Home] key, and select the component by pressing the MUSIC, MOVIE, or TV key, then press the PLAY (‹) key or TUNING (23) key to test it.
Back Enter |
Step 4
| Press the 5/°keys to select the input | |
>03.Video1 | that you want to register, then press the | |
| display operation 2 [Enter] key. | ||
>04.Video2 | ||
Back Enter |
|
Step 5
| Press the 5/°keys to select the com- | |
>05.VCR | ponent that you want to register, then | |
| press the display operation 2 [Enter] | ||
>06.Cable | ||
key. | ||
Back Enter |
Step 6
| Press the 5/°keys to select the maker | |
>Kenwood | of the component that you want to reg- | |
ister, then press the display operation | ||
>Aiwa | ||
Back Enter | 2 [Enter] key. |
If the component does not respond when you try to control it, return to step 7 and enter the next setup code on the list. Repeat this procedure until you find the code that matches the component. When the component does not respond, select "Nothing."
Step 9
| Press the display operation 2 [Enter] |
>01.IR | key to store the code. |
>02.Surround |
|
Home Enter |
|
Repeat steps 3 through 9 to enter the codes for each component you want to control.
Press the display operation 1 key repeatedly until “Menu” appears in the display.
If you accidentally exit the registration mode by pressing the wrong key, you will not lose any setup codes you have already saved.
In the initial factory setting, the remote control already has provisional component names registered for each input. Before you register setup codes, pressing the input keys of the remote control causes the display to change from the factory preset input names of the receiver (VIDEO1, VIDEO2, etc.) to the input names registered in the remote control (VCR1, VCR2, etc.). Once you have registered the appropriate setup codes for your components, pressing the input keys of the remote control causes the display to change to the actually connected component names (LD, DVD, etc.) for which you have registered setup codes.