4Press the 5/° keys to select the location.

•Extend1 – Extend5 are available.

5Press the [Enter] key.

•The remote control is ready for receiving the remote control code.

Waiting >Extend1 Clr Exit

Getting the most from your remote control

Restoring the original factory settings

9

You can restore the setup codes or memories to their original default settings.

5

+ +

6Press the key of the same operation that you want to store.

•The remote code is send to the remote control unit.

•"Complete" appears when finished.

TUNING

BAND

ENTER

– –

Complete >Extend1 Extend 1

•When it takes for more than 8 seconds or the remote control unit does not receive the remote control code well, "Error" appears in the display. In this case, re-operate from the step 1.

•"Full" appears when the memory is full. Re-operate from the step 1 after deleting some memories.

7The remote control code is stored on the memory (Extend1 – Extend5) of the remote control unit.

To delete the stored memory

Press the [Clr] key in step 5. "Cleared" appears in the display and the memory that is selected in step 4 is erased.

To operate other components by using the stored memory

1Press the MUSIC, MOVIE, or TV key to select desired input source.

•The Menu display appears.

2Press the [Menu] key .3Press the 5/°keys to select the memory you want to operate.4Press the [Enter] key.
Insert the batteries during pressing and holding the [5] keys and [ 21] key.

•"Cleared" appears in the display, and the remote settings return to their original default settings.

Remote Control