Getting the most from your remote control
The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit.
Refer to "Remote operation of other components" for details about the operations available for each component.
!
Low battery warning
Replace all four batteries with new ones when you notice a shortening of the distance from which the remote control will operate. The remote control is designed to retain setup codes in memory while you change batteries.
How to use the display operation keys
To register the setup code, use the display operation 1 key, display operation 2 key, or 5/°keys.
Registering setup codes for other components
Display 
Display operation 1 
5/°
Display operation 2
+ +
– –
1Press the display operation 1 key repeatedly until “Menu” appears in the display.
Video1:
VCR
Menu
3
Display 
Display operation 1 
5/° Display operation 2
+ +
– –
For step 1 through step @, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation keys so that the display appears.
The display operation 1 key and display operation 2 key work as the function key displayed in the display above.
2Press the display operation 2 [Menu] key repeatedly until “01.IR” appears in the display.
•The setup display appears.
>01.IR
>02.Surround Home Enter
>05.VCR >06.Cable Back Enter
The display operation 1 key
•[Back]
Go back to the previous display.
•[Home]
Go back to the initial display.
•[Clr]
Erase the internal memory.
The display operation 2 key
•[Enter]
Enter the selected item.
•[Menu]
Display the menu.
•[Setup]
Go to the setup display.
•[Exit]
Exit from the current operation.
•[Sel]
Select the item.
3Press the 5/°keys to select “01.IR,” then press the display operation 2 [Enter] key.
•The input selecting display appears.
>03.Video1 >04.Video2 Back Enter
•At this time all inputs become available regardless of any earlier registration.
4Press the 5/°keys to select the input that you want to |
register. |
• Each time you press the 5/° key, the input changes as follows: |
When the display goes off
The display goes off automatically when you do not operate for more than 8 seconds. In this case, press the display operation 1 key, display operation 2 key, or 5/°keys.
When you are confused about what’s being displayed
Press the display operation 1 key repeatedly until “Menu” appears in the display.
The display returns to the initial display.
01: CD/DVD |
02:MD/Tape
03:Video1
04:Video2
05:Video3
06:DVD
07:TV1
08:TV2
09: | Cable | Control | ||
|
| 10: | Phono | |
|
|
| ||
• Example: To select the source connected the VIDEO1 jack, select |
| |||
"Video1". |
| Remote | ||
|
|
|
| |