Operating other components
This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections.
Getting the most from your remote control
Changing (confirming) the operation mode
5
This operation lets you change the remote control operation mode without changing the input selector.
You may find this useful when you want to control one component while using another. (For example, if you want to rewind the tape deck while listening to a CD.)
SHIFT | MUSIC, MOVIE, | |
| AV.POWER I / | ||
TV | ||
|
+ | + | SHIFT | MUSIC, MOVIE, |
– | – |
| |
|
|
| TV |
|
| + | + |
|
| – | – |
During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.
1Use the MUSIC, MOVIE, or TV key to select the component you desire.•Pressing the MUSIC or MOVIE key also changes the input selector on the receiver. If you do not want to change the current input, press the SHIFT key before step 1.
| MUSIC key | MOVIE key | TV key | ||||||||||
|
|
| 1 | CD/DVD |
|
| 1 Video1 |
| 1 | TV1 | ||
| 2 | TAPE or MD |
|
| 2 Video2 | 2 | TV2 | |||||
|
| 3 | Tuner |
|
| 3 Video3 |
| 3 | CABLE | |||
|
|
| ||||||||||
|
|
| 4 | PHONO |
|
| 4 DVD 6CH |
|
|
|
| |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| 5 AV AUX |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Video1:
VCR
Menu
Select source
• You cannot select the source that is not registered.
2Press the AV. POWER
key.• The selected component turns on or off.
3Press the operation keys you desire.•See "Remote operation of other components" at the end of this manual for a list of keys available with each component.
RC!The remote control mode remains in the set at the component selected in step 1 mode until you select another component.
Note
Be sure to point the remote control at the remote sensor on the receiver when you want to operate KENWOOD components connected by system control cords. Otherwise, point the remote control at the component you want to operate.
During opration, make sure you start the next step within 8seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.
1Press the SHIFT key.• “Shift” appears in the display.
Shift
VCR
Menu
• To operate a TV, start form step 2.
2Press the MUSIC, MOVIE, or TV key repeatedly to display the remote control mode for the component you want to control.
Press the MUSIC, MOVIE, or TV key until the desired source appears.Shift
DVD
Menu
The component to be controlled
•Pressing any other keys after the SHIFT key cancels the shift function and sends the normal code associated with the respective key.
•The input selector does not change during this operation.
•If you press MUSIC or MOVIE key more than 3 seconds after pressing the SHIFT key, the input selector changes together with the operation mode.
3Execute the desired operations.• See "Remote operation of other components" for a list of keys |
| |
| ||
available with each component. | RC! |
|
| The operation mode remains set at the component specified in | Control | |
| then press the MUSIC or MOVIE key to return to the original | ||
| step 2. |
|
|
| To return control to the original component, press SHIFT and |
| |
| control mode. |
| Remote |
|
| |
|
|
|