Chapter One : Connecting Your Devices

Connecting Your Cable TV or Satellite Tuner, continued

Connections

T

R

Do not plug in the receiver or devices to AC power until you have connected all your devices.

This section focuses on the connections from your cable or satellite tuner to the VR-4900/VR-4700/KRF-V9993D. Please refer to your tuner’s instructions for more detail about its connection jacks and capabilities.

The instructions in this section show one of several possible variations on connecting your tuner. For further assistance on optional configurations, contact your cable or satellite provider.

T

To Connect a Cable TV uner with a Composite ( CA) Video Output:

1.Review the information under “Before You Begin” on page 1. It contains important notes about the types of video connections you can make.

2.Connect the audio and video cables from the cable tuner’s Audio and Video Out jacks to the receiver’s VIDEO2, VIDEO3, or VIDEO4 PLAY IN jacks as shown to the left.

3. Go to “Noting Your Devices” on page 3 and note which jack you used to connect your tuner. In addition, note the brand name and model number of the tuner.

To Connect a Cable TV uner without a Composite (RCA) Video Output:

1.Review the information under “Before You Begin” on page 1. It contains important notes about the types of video connections you can make.

2.Connect the audio cables from the cable tuner’s Audio Out jacks to the receiver’s VIDEO2, VIDEO3, or VIDEO4 PLAY IN jacks as shown to the left.

3.Leave the cable tuner’s video out (RF jack) connected directly to your VCR or TV (wherever you already have it connected). See “How Do I Operate Devices?” on page 29 of theUsers’ Guide for details about using this setup.

4. Go to “Noting Your Devices” on page 3 and note which jack you used to connect your tuner. In addition, note the brand name and model number of the tuner.

To Connect a Satellite Tuner:

1.Review the information under “Before You Begin” on page 1. It contains important notes about the types of video connections you can make.

2.If your satellite tuner has a digital output jack, connect a digital (coaxial or optical) cable between the satellite tuner’s digital output jack and the receiver’s VIDEO2, VIDEO3 or VIDEO4 digital input jack as shown in the figure on the left.

Note that the jack sets are linked, even though they are not adjacent. You must connect all of the cables from your satellite receiver to a linked jack set. For example,

if you connect the analog cables to VIDEO2 and the digital optical cable to VIDEO3, your satellite receiver will not work correctly.

3.Connect the audio and video cables from the satellite

tuner’s Audio and Video Out jacks to the receiver’s 11 VIDEO2, VIDEO3, or VIDEO4 PLAY IN jacks as shown

to the left.

4. Go to “Noting Your Devices” on page 3 and note which jack you used to connect your tuner. In addition, note the brand name and model number of the tuner.