Chapter Two : Setting Up PowerTouch

Navigating PowerTouch Interface

Remote Setup

The PowerTouch has four basic menus as shown below.

MUSICMOVIE

SETUPEDIT

Some icons may not be displayed with certain models.

34 There are two ways for moving across these four basic menus:

•Touch character or icon “MUSIC”, “MOVIE”, “SETUP” or “EDIT” in the screen using a sty- lus or your finger.

•Touch the desired icon in the quick access menu on the left of the touch-screen.

MUSIC MOVIE SETUP EDIT

Quick access menu

For the rest of this chapter, you will be using the various settings on the Setup menu. The Setup menu includes the following settings and their subsettings:

•Preference, which contains the following:

•IR (“Identifying Devices For PowerTouch Control” on page 37)

This menu setting allows you to identify your con- nected devices to PowerTouch.

•Input (VR-4900/VR-4700/KRF-V9993D Users’ Guide).

•Multi Room (“Chapter Four: Setting Up Multiple Rooms” on page 45) VR-4900/KRF-V9993D only.

This menu setting allows you to activate dual-Room control, and to select which room you want to con- trol with PowerTouch.

•Copy (VR-4900/VR-4700)

This menu will allow you to copy all the settings stored in your PowerTouch to a second PowerTouch. Instructions are included in separately sold PowerTouch package.

•Surround (“Setting Up Speakers” on this page)

These menu settings allow you to set up speakers and subwoofer, set the distance from your speakers to the listening area, determine speaker levels, and set the sur- round speaker type. The Next button on each screen takes you to the next group of settings (i.e., pressing Next at SP Selection takes you to SP Distance without having to go back to the menu).

•Macro (VR-4900/VR-4700/KRF-V9993D Users’ Guide). This menu setting allows you to create custom macros that perform several operations (such as turning a de- vice on, changing the receiver’s input, and changing a TV station) with a single touch.

Quick Tour PowerTouch includes a Quick Tour to familiarize you with the options available and how to access them. You may want to run the Quick Tour before you begin setting up devices. To start the Quick Tour, use the stylus or your finger

to touch (Quick Tour) .

To stop the Quick Tour in the middle, touch the .

To change the time until the screen goes out:

In order to reduce the battery consumption, the Power Touch has been designed so that the screen goes out when there is no operation for a given time. This time can be changed.

1Touch (Setup) to call up the SETUP screen.

2Touch to call up the Standby Time setting screen.

3Touch or to set the desired time. The time until the screen goes out can be changed to any value from 5 to 30 seconds.

4Touch to return to the original screen.

Before you can begin using the receiver to control your home entertainment system, you must set up PowerTouch to operate your speakers effectively. There are four areas of speaker setup:

Setting Up Speakers

•SP Selection

•SP Distance

•SP Level

•Surround SP Type

You can set up your speakers in the order presented here (via the Next button) or individually, selecting each option from the Surround menu.

The receiver must be on, speakers must be connected, and Speaker A on the front panel must be turned on before you can set up speakers.