Kenwood KRF-V9993D, VR-4700, VR-4900 CHANNEL SPACE / DE-EMPHASISSwitch, Unpacking, Area, CHANNEL, DE, SPACE freq, USA, Canada, FM : 100 kHz, and South, American, AM :, 10 kHz, Countries, Other

CHANNEL SPACE / DE-EMPHASIS Switch

The CHANNEL SPACE/ DE-EMPHASIS switch on the rear panel is set to the correct setting that prevails in the area to which the unit is shipped. However, if the CHANNEL SPACE/ DE-EMPHASIS setting is not matched to the area where the unit is to be used; for instance, if you move from area 1 to area 2 as shown in the table to the right or vice versa, desired reception of AM/ FM broadcasts is not ex- pected. In this case, change the CHANNEL SPACE/ DE- EMPHASIS setting in accordance with the area corresponding to the table. The CHANNEL SPACE/ DE-EMPHASIS is switched over at the same time.

• When changing the setting of the CHANNEL SPACE/ DE-EMPHASISswitch, first unplug the power cord, and then reset the switch, plug the power cord back in, and

Not present for USA, Canada and Australia

	Area	CHANNEL		DE-		CHANNEL SPACE
		SPACE freq.		EMPHASIS		DE-EMPHASIS switch
	USA, Canada,	FM : 100 kHz
1	and South			75 ∝s
	American	AM :	10 kHz
										DE-EMPHASIS
	Countries								50 ∝s	CHANNEL SPACE
										75 ∝s
								FM 50kHz		FM 100kHz
					ND		AM	AM 9kHz		AM 10kHz
2	Other	FM :	50 kHz	50 ∝s
	Countries	AM :	9 kHz

iv

turn the power switch on.

		Unpacking
Unpack your new receiver carefully and make sure that all the accessories are present:
Remote control unit	Batteries	AM Loop Antenna	FM Antenna	RF remote Antenna
(PowerTouch)	C (LR-14) ⋅ 4			(VR-4900/VR-4700 only)

(for VR-4900/VR-4700)

AA (LR-6) ⋅ 6

(for KRF-V9993D)

If any accessories are missing, or if the receiver is damaged or fails to operate, notify your dealer immediately. If your receiver was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the receiver in the future.