Remote Setup
Chapter Two : Setting Up PowerTouch
c.If you set your left and right front speakers to Lrg and want to send bass to the subwoofer in all Listen
modes, touch 
until “On” appears above the button. All modes SW
If you set your left and right front speakers to Nml, SW
| d. Touch | to save your settings. |
e.Touch 
to move to the next speaker setting or touch 
to return to the Setup Surround menu.
36 | If your front speakers are set to Nml, you can only set your |
| center and surround speakers to Nml (or Off). |
If you turn off the subwoofer, your front speakers are automatically set to Lrg. You may not set them to Nml.
1.Measure the distance from each speaker to the seat you most often use and note it below:
| Speaker | Distance (ft or m) |
|
|
2.If you are not already there, touch 
on the Setup Surround menu to open the Speaker Distance menu:
In this step you will use your ears to balance the volume level of all the system’s speakers except the subwoofer for your room and listening position. (To set the subwoofer level, see “Set- ting the Subwoofer Level” on page 37.) When all the speakers are set at the same volume level, your system will create a more realistic, spacious surround sound environment.
1.Eliminate as many external noise sources as possible.2.Sit in the place where you and your guests are most likely to sit while watching movies or listening to music.
3.Turn the receiver’s master volume up to
4.If you are not already there, touch 
on the Setup Surround menu to open the Speaker Level menu:
or 
to set the distance for the left front speaker.4.Touch 
or 
to select the next speaker.5.Repeat steps 3 and 4 for each speaker.6.Touch 
to move to the next speaker setting or touch 
to return to the Setup Surround menu.
until the Test Tone display reads “Manu”.6.Test noise will play from the left front speaker. Care- fully listen to the volume level of the noise.