Chapter One : Connecting Your Devices

Connecting Your CD-R Recorder, continued

Connections

Do not plug in the receiver to AC power until you have connected all your devices.

This section focuses on the connections from your CD-R recorder to the VR-4900/VR-4700/KRF-V9993D. Please refer to your CD-R recorder instructions for more detail about its connection jacks and capabilities.

Each set of instructions in this section shows one of several possible variations on connecting your CD-R recorder. For further assistance on optional configurations, contact the store where you purchased your CD-R recorder.

To Connect a CD-R Recorder:

1.Connect the audio cable from the CD-R recorder’s Play OUT jacks to the receiver’s CD-R PLAY IN jacks as shown to the left.

2.Connect the audio cable from the CD-R recorder’s Rec IN jacks to the receiver’s CD-R REC OUT jacks, as shown to the left.

3.Connect the digital cable (either coaxial or optical) from the CD-R’s digital jack to the appropriate digital jack on the receiver as shown to the left.

The illustration shows two digital connections, one for coaxial connection and one for optical connection. Your CD-R recorder supports one or the other of these con- nection methods—do not connect both.

If you use the optical digital cable, be sure to remove the protective cover from the optical jack before con- necting.

You only need to connect to the digital out jack if you will be recording from sources that are connected to a digital in jack, such as a CD or DVD player.

4. Go to “Noting Your Devices” on page 3 and note which jacks you used to connect your CD-R recorder. In addi- tion, note the brand name and model number of the CD-R recorder.

19