Kenwood VR-2000, KRF-VBB81 D Set CD2, Summary of Input Level Setup, _ Operation in the Setup menu

VR-2OgO!VR-2OSO/KAF V8881 D/KRF-V?771 D (En/K]

Summary of Input Level Setup

If the CLIP INDICATOR on the front panel lights, change the

"Input Level" setup.

•The "Input Level" Can be set for an,/selected input

U Select the icon of the input for which you want to set the input level

•	When adjusting			"CD1",		"Vldeo2",	"Video3",	"Video4",	select
J	file	"Input	Analog"		icon	from the	fixed segment	for analog	_nput,
	and	then	go to	step

_=_ Select the "Main Menu" icon from the fixed segments.

• Select the "Stp" icon to d ssiay the "Setup" menu screen,

_ Operation in the "Setup" menu.

O Select the "Input" icon,

El Set the "Input Level"

• The input/evet from the input se ected in ste# I_1can be selected from "0 dB", "-3dB" and "-6 dB"

Each selection operat on of the "Input Level" icon switches it. If the CLIP INDICATOR lights up, set the level of the setected input to "-3dB" or "-6dB"

• This setting is possible only for "Room A",

Set "CD2 "

•Set the CD/TAPE2 MONITOR input iack to "CCI2" or "Tape2

{Monitor)" mode

Set• to"CD2" /onlyTape2"when the Multi-room capability CD Player is used

Set to "Tape2 (Monitor}" otherwise.

_l set "CD2/ Tape2"

0 Set "CD2/Tape2 _ in the same menu screen as step L_I.

• Rec out s not available when the input _s set to "CD2"