Kenwood KRF-X7775D manual Executing Several Operations at Once Macro function, Registering a macro

Executing Several Operations at Once (Macro function)

Executing Several Operations at Once (Macro function)

By registering several steps of remote control operations beforehand, these operations can be executed with a single operation. This function is re- ferred to as the macro function. The receiver can register up to three sets of macros. Up to 20 operation steps can be recorded for one macro.

Registering a macro

1.Press and hold the MACRO button on Remote Control unit for more than 2 seconds.

Using Receiver

2WAY LCD REMOTE CONTROL UNITMACRO

Select

2.Within 8 seconds, press the MUSIC (MACRO1), MOVIE (MACRO2) or TV (MACRO3) button.

MACRO

3.Press the control buttons in the order you want to execute them.

4.Press the MACRO button. Now the registration is complete.

5.Check the macro according to the following “Executing a macro” pro- cedure.

When there is a function which does not perform interim operation, a delay must be inserted. To insert a delay, insert a macro step for a button not related to the operation at that time (for example the STOP button during stop) etc. before the function for which the operation is to be delayed.

Press each button slowly and firmly.

“Full” is displayed when the maximum number of steps have been regis- tered.

If you do not perform any operation for more than 8 seconds in the middle of registration, the registration mode is canceled and the previous regis- tration remains without being cleared.

54