Receiving non-preset broadcast stations
A radio station can be tuned either by auto tuning or manual tuning according to the current reception condition.
(1)Press the SET/TUNING MODE key on the main unit (or the REPEAT/AUTO/MANU. key on the remote) to select AUTO or MANUAL tuning mode.
When “AUTO” is lit | : Indicates the auto mode (stereo reception) which is suitable |
| when the receiving condition is good. |
When “AUTO” is not lit : Indicates the manual mode (monaural reception) which is suitable when the receiving condition is poor.
÷ Usually leave “AUTO lit (auto tuning mode, stereo reception).
(2)“AUTO” or “MANUAL” is displayed when you press SET/TUNING MODE key, then press the 4/TUNINGfi or %TUNING/¢ key on the main unit to receive the de- sired station.
Pressing the 1TUNINGfi or ¡TUNING% key on the remote will enable you to select the desired station.
Auto tuning : Each press of the key tunes the next station automatically.
Manual tuning : Press and hold the key until the next station is tuned.
“AUTO” lights in auto tuning mode “STEREO” lights during stereo reception “TUNED” lights when a station is received
AUTO TUNED SP
EX. BASS
MHz
Frequency display
÷When the unit is in STANDBY mode (page 63), simply pressing the TUNER FM/AM key (or the FM/ AM key on the remote) switches the power ON and radio reception starts automatically. (One- touch operation)
÷During tuning, pressing and holding the 4/TUNINGfi or %TUNING/¢key on the main unit (or the 1 TUNINGfi or ¡ TUNING% key on the remote) makes it possible to skip undesired stations that may be received before the target station.
Basic section