Kenwood MDX-G1 32 EN, Recording CD tracks onto MD in desired sequence, 3Start recording, To stop recording :, Recording onto MD (continued), 1Make preparation for recording

Recording onto MD (continued)

With regards to track numbers at the time of recording

MD track numbers are used to search the beginning of a track or programming tracks.

÷In MD recording from the radio, AUX or CD source, track numbers are assigned automatically in the following cases.

–When the MD 6 or MD REC key is pressed in record-pause mode to resume recording.

–When the MD EDIT key on the remote is pressed during recording.

Recording CD tracks onto MD in desired sequence

The tracks in a CD can be recorded by rearranging them in the desired sequence when the recording speed is normal (CD=MD

NORM). Note that this function is not available when the recording speed is high (CD=MD HIGH).

MD O.T.E.	MD O.T.E.	SLEEP	POWER
	FM / AM	CD 6 MD 6
7 STOP	P. CALL	7STOP	P. CALL
	4		¢
	TUNINGfi	VOL.	TUNING%
	1		¡

Remote control unit only

1Make preparation for recording.

MD : See steps 1 to 3 of “Recording CD onto MD” (page 16 to 17).

2Program the CD tracks in the de- sired sequence.

See steps 1 to 5 of “Playing CD or MD tracks in the desired sequence” (page 24).

3Start recording.

Recording onto MD : Press the MD O.T.E. key.

To stop recording :

Press the 7STOP key.

÷Be careful not to switch the power off or apply shock or vibrations to the system while “MD WRITING” is displayed.

÷When recording with high volume, sound skip may occur during MD playback.To avoid this problem, reduce the volume during re- cording.

32 EN