Kenwood manual Recording in stereo with an external microphone, SONY MZ-B3E, To stop recording

Recording in stereo with an external microphone

You can record in stereo sound using ECM-909A, ECM-727P, etc. (not supplied).

You can record for up to 74 minutes on 74-minute MD or 60 minutes on 60- minute MD.

Stereo microphone

to MIC PLUG IN POWER

MONO (monaural)/

STEREO

1 Connect the microphone to the MIC PLUG IN POWER jack.

2 Set MONO/STEREO to STEREO.

3 Insert a recordable MD and start recording.

To record, see "Recording an MD right away!" (page 6).

While recording, "STEREO" appears in the display.

To stop recording

Press p.

To record in monaural for double the normal recording time of an MD Set MONO/STEREO to MONO. The recording time will be double the normal.

To record with an external monaural microphone

Use a monaural microphone ECM-T140,
ECM-T110, etc. (not supplied), and set	Various
MONO/STEREO to MONO.
Notes
∙ The MONO/STEREO switch functions
only when an external microphone is	ways
connected to the MIC PLUG IN POWER
jack.
∙ If you connect a stereo microphone and	of
set MONO/STEREO to MONO, the
	recording
only the left channel sound of the source
mixed sound from both the right and
left channels will be recorded.
∙ If you connect a monaural microphone
and set MONO/STEREO to STEREO,
will be recorded.
∙ The MDs recorded in monaural sound
can be played back only with an MD
player/recorder that has the monaural
playing function.

11

SONY MZ-B3 (E) 3-798-610-22(1)