Kenwood MZ-B3 manual Additional information

Symptom	Cause/Solution
Sound has a lot of	•Strong magnetism from a television or such device is
static.	interfering with operation.
	b Move away from the source of strong magnetism.
The REC button stays	•You pressed the REC button while the recorder was
pressed down.	not connected to the power source.
	b Install dry batteries or a rechargeable battery. Or
	connect to house current with the AC power
	adaptor (page 6 or 27).
Cannot erase the track	•You tried to erase the track marks after pressing =
marks.	or +and pressing P.
	b Press P before pressing =or +, then erase
	the track marks.
The clock loses time or	•The built-in battery for a clock is weak.
the display flashes.	b Connect the power source to charge the built-in
	battery. After charging, set the clock again. Note
	that the clock normally loses about 2 minutes per
	month (page 18).
The recording date was	•The time indication flashes.
not stamped onto the	b Set the clock again (page 17).
disc.
Cannot record for	•When a lot of short tracks are recorded on a disc, the
the maximum	total recording time may be shorter than the
recording time of a	maximum recording capacity.
disc.	•You recorded over a previous recording repeatedly
	(page 33).
	b Erase all the tracks of the disc, then start recording
	(page 26).

Additional information

33

SONY MZ-B3 (E) 3-798-610-22(1)