Kenwood MZ-B3 zEditing recorded tracks, Track marking a recording, playback, Various ways of

zEditing recorded tracks

You can edit your recordings by adding or erasing track marks, or erasing tracks.

Premastered MDs cannot be edited.

Track marking a recording

You can add track marks so that you can quickly find and play from the marked position.

The track numbers will increase as follows.

1	2	3	4
	4

.Track marking

1 2 3 4 5

Track numbers increase

TRACK MARK

While the recorder is playing an MD, press TRACK MARK on the recorder at the point you want to mark.

A track mark is added and the track number will increase by one.

Elapsed time of the track

Track number being played

MONO

MONO

Note

TRACK MARK on the remote controller does not function during playback.

To add track marks while recording

See "Track marking while recording" (page 13).

To erase track marks

See "Erasing a track mark" (page 24).

Notes

∙When you press p after adding track marks, "Toc Edit" flashes and the recorder starts writing the new data to the MD. Do not move or jog the recorder while "Toc Edit" is flashing in the display.

∙You cannot add track marks on an MD that is record-protected. Before adding track marks, close the tab on the side of the MD.

Editing recorded	Various ways of
tracks	playback

23

SONY MZ-B3 (E) 3-798-373-22(1)