Kenwood manual Tips on recording, Various ways of recording, SONY MZ-B3E, Recording, condition

Tips on recording

To monitor the sound being recorded

Connect headphones (not supplied) to the 2jack and adjust the volume by turning VOL. Sound levels are copied onto the MD automatically and independently of the volume for monitoring.

To know the recording condition

The record indicator flashes according to the recording condition.

Recording	Record indicator
condition
While recording	Flashes according
	to the loudness of
	the source (voice
	mirror).
Recording	Flashes.
standby
Recording with	Slowly flashes.
less than 3
minutes’
recording time
available

To protect a recorded MD

To record-protect an MD, slide open the tab at the side of the MD. In this position, the MD cannot be recorded. To record again, slide the tab back so the tab is visible.

Rear of an MD

Tab

Record-protect

Continue to next page m

Various ways of recording

15

SONY MZ-B3 (E) 3-798-610-22(1)