Kenwood NV-301, NV-701 Clock adjustment, 1 Select “Clock Options”, 2 Select “Adjust Time”, 3 Adjust the hour, 4 Adjust the minute, 5 Start the clock

Clock adjustment 19

This unit incorporates a clock function. It is necessary to set the correct time before using the timer functions. The time can be displayed only while the power is in standby.

					Thefollowingitemscanbeselectedbypressingthe
1 Select “Clock Options”.					MULTI CONTROL keys repeatedly.
							(“CD Program Play”)
							(“Recording Options”)
		MULTI CONTROL					“Tape Options”
	MENU			SET
	DEMO						“Audio Options”
							“Clock Options”
							“Surround Options” (NV-701 only)
2 Select “Adjust Time”.							+“Clock Options” is scrolled in the display
								Clock Option
	MULTI CONTROL
			SET
					Thefollowingitemscanbeselectedbypressingthe
					MULTI CONTROL keys repeatedly.
							“Sleep Timer”
3 Adjust the hour.							“Adjust Time”
							“Timer Play”
	MULTI CONTROL						“Auto Power Save”
			SET
					Example: Setting the time to 8:45 in the morning
	To decrease	To increase
								8:00	AM	8:00
	the figure	the figure
					(For U.K. and Europe)				(Other countries)
					0Ô1Ô2...13Ô14...Ô0 ... AM12ÔAM1ÔAM2...
4 Adjust the minute.									PM1ÔPM2...ÔAM12 ...
					÷ The time display starts to blink.
	MULTI CONTROL				÷ Press the SET key. The hour is entered and the minute
			SET			display starts to blink.
	To decrease	To increase
								8:45	AM	8:45
	the figure	the figure
					(For U.K. and Europe)				(Other countries)
5 Start the clock.
								00Ô01Ô02...59Ô00Ô01...
		ENTER			÷ Press the BACK key to return to the previous step and
						restart operation from there.
					÷ To set the time precisely, press the ENTER key at the
						same moment as a time announcement.

section Preparation

To display the time

(In standby mode or when the MD/DVD (NV-301 only) or VIDEO/6ch IN (NV-701 only) input is selected.)

ENTER

(Displayed for approximately 5 seconds)

÷The clock is reset and the clock display blinks if the power cord has been unplugged from the AC power outlet and plugged in again, or after a power failure. In this case, set the time again.