30

To reduce noise in playback

You can select Dolby NR (Noise Reduction) to reduce high frequency noise and improve the sound of audio playback when listening to tapes.

1Select “Tape Options”.

Let's have sound

Transport direction indicators

The indicators (2, 3) indicate the current direction in which the tape advances when playback or record-

ing is started automatically by the one-touch operation function, etc. This direction is the direction stored in memory when tape playback was last stopped.

MENU

DEMO

“Tape Options”

“Audio Options” “Clock Options”

(To switch the tape transport direction, press the TAPE (23) key to reverse the direction, then press the 7(stop) key.)

MULTI CONTROL

“Surround Options” (NV- 701 only)

SET

2Select “Dolby–NR”.

 

MULTI CONTROL

 

 

 

 

“Reverse Mode”

 

 

“Dolby–NR”

 

SET

 

 

section

3Turn Dolby NR on or off.

 

Basic

MULTI CONTROL

 

Lights up when

 

 

 

 

Dolby NR is on.

 

 

SET

 

 

 

 

 

 

NR

The following items can be selected by pressing the MULTI CONTROL keys repeatedly.

“Dolby NR–ON”: Add noise reduction to the audio playback. “DolbyNR–OFF”:Playthecassettetape without any noise reduction processing.

4Save the setting and exit the mode.

ENTER

Tape direction indicators

•L R

SW

(SW channel lights for NV-701 only)

A tip for the use of the tape counter

The tape counter is set to “0000” when a cassette tape is loaded. In case you want to interrupt recording (playback) in the middle of the tape, the counter reading will be helpful as a reference for locating the same location when continuing the recording (playback) the next time. The tape counter figure decrements during recording or playback of the reverse side

(while the 3tape transport indicator is lit).

To reset the tape counter to “0000”, open the cassette holder once. The counter will be reset.

N-TAPE 0000

“N–TAPE” or “C–TAPE” appear to indicate whether the tape in the cassette deck is normal or high bias.