Kenwood NV-301, NV-701 input), 5.Start recording, To pause recording (Main unit only), 4. Select the source to be recorded. (Except for TAPE, SET, Let's record, 1Start recording

Let's record 35

Select CD, TUNER, or MD/DVD				4. Select the source to be recorded. (Except for TAPE
(NV-301 only) or VIDEO/6ch IN				input)
(NV-701 only) input for the source.
CD	CD			Press the desired key.
TUNER	TUNER				CD01	0:02
BAND	BAND
			4		The input source component to
TAPE		TAPE			be recorded should be displayed.
				÷ If a disc has already been loaded when the CD input is selected, it starts to
	MD/DVD	VIDEO/6ch IN		play automatically. In this case, press the 7 (stop) key to stop it.
				÷ When you select VIDEO/6ch IN (NV-701 only) or MD/DVD (NV-301 only) to
				record the external input, adjust the input level. Q
NV-301		NV-701

5.Start recording.

1Start recording.

SET

	2Play (or tune) the input source to be recorded.
5					÷ If a disc has already been loaded
	Lights				when the CD input is selected, it
					will starts recording automatically.
		REC			÷ Recording stops automatically
					when the tape side(s) to be re-
			L	R	corded have been fully recorded.
					÷ Press the stop (7) key of the cas-
	• SW
					sette deck unit to stop recording
					(see the next page).
		(SW channel lights
		for NV-701 only)

To pause recording (Main unit only)

section Basic

Lights

SET

REC

L R

SW

(SW channel lights for NV-701 only)

÷Pressing the SET (¶) key pauses recording after leaving a non-recorded space of about 4 seconds.

÷If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant.