Kenwood SYSTEM-H2EV Factory Defaults, Specifications, Troubleshooting Guide, Auto Shutdown

KEN.4061 ReceiverCarHome Manual 11/19/04 9:37 AM Page 30

Program Alert: Program Alert On/Off

Use this selection to enable or disable the

Program Alert.

Auto Shutdown

30This gives you the option of having Here2Everywhere automatically shut off after a 1-hour idle period. After 59 minutes of inactivity, a display prompt will appear on the screen with the option “Cancel Auto Shutdown.” Press the Control Knob (or the remote Select button) to cancel the shutdown and restart the idle timer.

Sleep Mode

This gives you the option to have the unit shut down after a specific period of time: 15, 30, 45, or 60 minutes.

Factory Defaults

Select this menu option to restore Here2Everywhere to all factory defaults.

Specifications

Audio output (560 ohms)	776mV RMS
Fuse	3A fast blow

Power supply requirements 9 ~ 16V, negative ground

Dimensions 110mm(L) x 74mm(W) x 30mm(D)

Troubleshooting Guide

Problem	Possible Cause	Corrective Action
No power on Here2Everywhere	Power supply/cigarette lighter adapter	Make sure power supply/adapter is
(power indicator/display not illuminated)	is not properly connected	properly connected
	Blown fuse in cigarette lighter adapter	Check the fuse; if blown, replace with
		supplied spare fuse
	Here2Everywhere not properly seated	Remove the Here2Everywhere from cradle and
	in docking cradle	put it back in the cradle, taking care to seat
		it securely in the cradle grooves
	Car cigarette lighter socket fuse is blown	Use the cigarette lighter to test the car’s cigarette
		lighter socket and fuse. If the cigarette lighter
		doesn’t glow or get hot, check and replace
		the fuse in the fuse panel. Note: use caution
		with hot cigarette lighter.
No sound	Audio cable is not properly connected	Make sure cable is properly connected
Display reads “Acquiring Signal”	Signal is weak or can’t be found	Check the “Antenna Aiming” screen
		(see pg. 27); Change the antenna/vehicle
		location to maximize signal quality
	Metallic window screen is	Move antenna to window with a
	interfering with reception	non-metallic screen
Display reads “Antenna error”	The antenna is not connected	Verify antenna connections
	The antenna or cable is faulty	Replace antenna
Display reads “Call 1-888-539-SIRIUS to	SIRIUS subscription has not been activated,	Call SIRIUS to activate or update
Subscribe”	or the specific channel is blocked by SIRIUS	your subscription
Display reads “Invalid Channel”	The channel number entered is invalid or	Select a different channel number
	the channel does not exist
Here2Everywhere operates erroneously	Microprocessor error	Turn the power off (press the Power
		button); wait 5-10 seconds, then turn
		the power on again
		Turn the unit’s power off; remove it from
		the dock; wait 5-10 seconds; replace it
		in the dock and turn power back on
		If the problem persists, consult your
		Kenwood dealer
Sound mutes intermittently	Metallic window screen is interfering	Move antenna to a window with a
	with reception	non-metallic screen

31