Kenwood TH-D7A, TH-D7E instruction manual Memory Channels, Channel?, Parameter, Ctcss on

MEMORY CHANNELS

1In memory channels, you can store frequencies and

2related data that you often use. Then you need not

3reprogram those data every time. You can quickly recall a programmed channel by simple operation. A total of

4200 memory channels are available for bands A and B.

5

6SIMPLEX & REPEATER OR ODD-SPLIT MEMORY

7CHANNEL?

The data listed below can be stored in each memory channel:

Parameter	Simplex &	Odd-split
	Repeater
Receive frequency	Yes	Yes
Transmit frequency		Yes
Tone frequency	Yes	Yes

8

9

You can use each memory channel as a simplex & repeater channel or odd-split channel. Store only one

Tone ON	Yes	Yes
CTCSS frequency	Yes	Yes

10frequency to use as a simplex & repeater channel or two

11separate frequencies to use as an odd-split channel. Select either application for each channel depending on

12the operations you have in mind.

13Simplex & repeater channel allows:

14• Simplex frequency operation

15• Repeater operation with a standard offset

16(If an offset direction is stored)

17Odd-split channel allows:

18• Repeater operation with a non-standard offset

19Note:

◆ Not only can you store data in memory channels, but you can also

20overwrite existing data with new data.

21◆ If you have recalled a memory channel on the non-current band

(A or B), you cannot select the same channel on the current band to

22program data.

CTCSS ON	Yes	Yes
Offset direction	Yes	N/A
Offset frequency	Yes	N/A
Reverse ON	Yes	N/A
Frequency step size	Yes	Yes
Memory channel lockout	Yes	Yes
Memory channel name	Yes	Yes
AM/FM mode selection	Yes	Yes
(TH-D7A only)

Yes: Can be stored in memory.

N/A: Cannot be stored in memory.

26