2Press the F key, then press the MR key.
3The VFO frequency and the last used memory channel are scanned alternately.
9 CALL/VFO Scan
1Press and hold the CALL key for longer than one second in VFO mode.
2The frequency and CALL frequency are scanned alternately.
10 CALL / Memory Scan
1Press and hold the CALL key for longer than one second in memory channel mode.
2The memory channel in use and CALL frequency are scanned alternately.
11 V/M/C(VFO/Memory/CALL) Scan
(except Europian version)
1Press the F key, then press the CALL key.
2The VFO frequency, last used memory channel, and CALL frequency are scanned alternately.
12 The Alert Function
This function allows you to monitor memory channel 1 for activity once every 5 seconds, even when you are tuned to a different frequency.
1Enter the frequency you wish to monitor in memory channel 1.
2Adjust the SQL control to the threshold point.
3Press the F key, then press the 4 key. The AL indicator displays.
4A beep will sound when a signal is present.
5Press the F key and the 4 key again to turn this function off. The AL indicator will disappear from the display.
When using the Alert function, be aware that:
* Channel 1 CTCSS programming is ignored.
nYou will not hear voice communication while scanning memory channel 1, only a beep if a signal is present.
nMemory channel 1 is also monitored when the dual band and single band are displayed.
28
