Kenwood TH78E, TH-78A instruction manual Then f2

Switching speaker output when a external

Turn CLOCK function on or off	F then 7
Turn switch on timerfunction on or off	F then 8
Turn switch off timerfunction on or off	F then 9
Activate memory channel lock out function	F then 0
Turn KEY LOCK function on or off	F then M
Turn TX STOP function on or off	F then f2
Select transmit output power level	F then TONE
Activate duplex operation	F then DUAL
Turn reverse function on or off	F then SHIFT
Return the encoder to the original setting	F (1 second)
mode	then E.CHG
Recalling stored DTMF cords	F (1 second)
	then MHz
Turn automatic power off function on or off	F (1 second)
	then VFO
Turn battery saver function on or off	F (1 second)
	then MR
Signaling squelch function on or off	F (1 second)
	then CALL

	TO DO THIS		PRESS
Message memory recall		F (1 second)
			then MSG
Activate paging code selection mode		F (1 second)
				then 1
Activate DTSS code selection mode		F (1 second)
				then 2
Activate frequency step selection mode		F (1 second)
				then 3
Recall lower limit frequency of programmable		F (1 second)
band scan				then 4
Recall upper limit frequency of programmable		F (1 second)
band scan				then 5
Change the speaker output when a external		F (1 second)
speaker is connected				then 6
Activate Time setting function		F (1 second)
				then 7
Switch-on timer setting mode		F (1 second)
				then 8
Switch-off timer setting mode		F (1 second)
				then 9
Select tone frequency		F (1 second)
		then TONE

A