H Paging mode
Press any key
6 Receive Message Memory
This transceiver has 10 incoming message memory channels, in which received messages are stored.
If you press the MESSAGE key in the message mode, the last stored message is displayed.
You can store your message in memory using one of the following two methods. You can select the desired mode.
nIf there is data in all 10 message memory channels, new data is written into channel 0 (Factory default).
nIf data is stored in all 10 message memory channels, new data is not written into any channel.
Press and hold the MESSAGE key, and switch the power on to change this function.
Receive message memory clear
Press and hold the M key for longer than one second, then press the MESSAGE key.
47
