1
1
2
1
GETTING STARTED
Turn the Power switch/ Volume control clockwise to switch the transceiver power ON.
A beep sounds.
Rotate the Channel selector to select your desired channel.
When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary.
To make a call, press and hold the PTT switch, then speak into the microphone to transmit. Release the PTT switch to receive.
3 | The LED lights red while transmitting. |
| For best sound quality, speak into the |
| microphone in your normal voice while |
| holding the microphone approximately |
| 1.5 inches (3 to 4 cm) from your lips. |
9